![]() ![]() ![]() ![]() # older Configuration elements till EDIABAS 7. Description : FilePathName of a private TraceWriter Description : Synchronisation of Trace files Description : Number of History-Trace-Files Value : 0 = Opening/Closing after every dump The code read by INPA cable will tell exactly if it is for this. Description : Manner of Opening/Closing of Trace-Files 3 Fanatics (E21 E30 E36 E46 E90 E91 E92 E93 F30) Replies. Description : Logging of fatal faults in EDIABAS.log Description : Enable/Disable EDIABAS-Icon in System-Tray # new Configuration elements since EDIABAS 7.2 # # ausführliche Variante von EDIABAS.ini (mit Kurz-Info und Default) # CodeMapping = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab I have also bridged the 7/8 pin on the cableĭevice Manage: Ports USB Serial Port: COM7 / Latency 1 I tried a full re-install and followed all of the steps, but am assuming I still have something not quite right in my EDIABAS.ini file. I have a K DCAN USB Interface (INPA Compatible), but can't seem to get the ignition showing to on and get the below error. I have spent a few days looking over the forums and trying all different settings to get my INPA connecting, so I can reset the steering angle sensor. IFH009 - needed to flick the switch on the cable (pre/post 2006) OBD.ini File - Confirm Port matches above COM1, updated Hardware=USB Latency - Confirmed it had been set to 1 in Device Manager In summary, I got the following 3 issues come up.after resolving one, I got the next:ĬOM Port - Made COM1 the port in Device Manager and confirmed it was the same in the OBD file. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |